Roller skate plate specs, parts and tools

Specs:

• Extruded aircraft aluminum base plates
• 20º standard king pins
• Adjustable pivots
• Delrin pivot cups
• 11/16" socket wrench required for the king pin nuts
• 4mm Allen key required for the king pin set screws
• 11/16" crescent wrench required for the king pin lock nuts
• 10mm flat wrench required for the adjustable pivot pins
• 12mm flat wrench required for the pivot lock nuts
• 1/2" socket required for the wheel nuts
• 5mm Allen key required for the stopper screws

Stoppers:

• 5/8” stoppers and jam plugs
• Requires Bont Athena stopper screw

Bearing Size:

• 8mm bearings

Cushions:

• Comes standard with Bont urethane 88A cushions
• Compatible with Bont cushions

Pivot Cups:

• Bont Delrin pivot cups

Tools Provided:

• No tools provided

Recommended Tools:

• Powerdyne Y4 skate tool
• Powerdyne 11/16" wrench
• 4mm Allen key

Specs:

• Nylon fibreglass composite base plates
• 20º inverted king pins
• Delrin pivot cups
• 9/16" socket required for the king pin nuts
• 1/2" socket required for the wheel nuts
• 4mm Allen key required for the stopper screws

Stoppers:

• 5/8” stoppers and jam plugs
• Requires Bont Prodigy stopper screw

Bearing Size:

• 8mm bearings

Cushions:

• Comes standard with Bont urethane 88A cushions
• Compatible with Bont cushions

Pivot Cups:

• Bont Delrin pivot cups

Tools Provided:

• No tools provided

Recommended Tools:

• Enuff skate tool
• Powerdyne Y4 skate tool

Specs:

• Extruded aircraft aluminum base plates
• 20º inverted king pins
• Delrin pivot cups
• 9/16" socket required for the king pin nuts
• 1/2" socket required for the wheel nuts
• 5mm Allen key required for the stopper screws

Stoppers:

• 5/8” stoppers and jam plugs
• Requires Bont Tracer stopper screw

Bearing Size:

• 8mm bearings

Cushions:

• Comes standard with Bont urethane 88A cushions
• Compatible with Bont cushions

Pivot Cups:

• Bont Delrin pivot cups

Tools Provided:

• No tools provided

Recommended Tools:

• Enuff skate tool
• Powerdyne Y4 skate tool
• Powerdyne T-handle 5mm Allen key

Specs:

• Composite nylon plates
• 20º inverted king pins
• 9/16” socket required for the king pin nuts
• 1/2” socket required for the wheel nuts
• 5mm Allen key required for the stopper screws

Stoppers:

• 5/8” stoppers and jam plugs
• Requires Crazy stopper screw (make sure to keep the small metal square, this will be required to safely tighten your stoppers)

Bearing Size:

• 8mm bearings

Cushions:

• Comes standard with Galaxy cushions
• Compatible with Universal Magic Cushions (with change of some retainers)
• Compatible with Sure-Grip Super Cushions (with change to all retainers)

Pivot Cups:

• Black Galaxy Pivot cups

Tools Provided:

• No tools provided

Recommended Tools:

• Enuff skate tool
• Powerdyne Y4 skate tool
• Powerdyne T-handle 5mm Allen key

Specs:

• Extruded aircraft aluminum base plates
• 20º inverted steel king pins
• Delrin pivot cups
• 9/16” socket required for the king pin nuts
• 16mm crescent wrench required for the king pin lock nuts
• 1/2” socket required for the wheel nuts
• 5mm Allen key required for the stopper screws

Stoppers:

• 5/8” stoppers and jam plugs
• Requires Crazy stopper screw

Bearing Size:

• 8mm bearings

Cushions:

• Comes standard with 3 hardness of Crazy Cushions (3 sets)
• Only compatible with Crazy cushions

Pivot Cups:

• Crazy Delrin pivot cups

Tools Provided:

• 16mm crescent wrench
• 5mm Allen key
• Double ended socket: 9/16” for truck adjustment & 1/2” for wheel nuts

Recommended Tools:

• Powerdyne T-handle 5mm Allen key
• Powerdyne Y4 skate tool
• 16mm crescent wrench

Specs:

• Aluminum alloy plates
• 10º inverted king pins
• 9/16” socket required for the king pin nuts
• 1/2” socket required for the wheel nuts
• 15/16” crescent wrench required for the stopper nuts

Stoppers:

• 5/8” stoppers and jam plugs
• Requires 5/8” stopper hardware

Bearing Size:

• 8mm bearings

Cushions:

• Comes standard with Impala cushions
• Compatible with Sure-Grip Super Cushions (agility setup)

Pivot Cups:

• Impala pivot cups

Tools Provided:

• No tools provided

Recommended Tools:

• Powerdyne Y3 skate tool
• Impala skate tool

Specs:

• Aluminum base plates
• 10º inverted king pins
• 9/16” socket required for the king pin nuts
• 1/2” socket required for the wheel nuts
• Phillips head screw driver required for the bell type stoppers

Stoppers:

• 5/8” stoppers and jam plugs
• Requires Philips stopper screw, provided with skates only

Bearing Size:

• 8mm bearings

Cushions:

• Comes standard with Impala cushions
• Compatible with Sure-Grip Super Cushions (agility setup)

Pivot Cups:

• Impala pivot cups

Tools Provided:

• No tools provided

Recommended Tools:

• Enuff skate tool

Specs:

• Aluminum base plates
• 10º inverted king pins
• 9/16” socket required for the king pin nuts
• 1/2” socket required for the wheel nuts
• 22mm crescent wrench required for the stopper nuts

Stoppers:

• Metric stoppers and jam plugs
• Requires metric nut and washer stopper hardware - currently only provided on skates

Bearing Size:

• 8mm bearings

Cushions:

• Comes standard with Rainbow Rider cushions
• Compatible with Sure-Grip Super Cushions
• Please note: the king pin is loose, and will require some patience

Pivot Cups:

• Impala pivot cups

Tools Provided:

• Sometime comes with a Crab wrench (9/16", 1/2", 15/16")

Recommended Tools:

• Enuff skate tool
• 22mm crescent wrench

Specs:

• Extruded aircraft aluminum base plates
• 16º standard king pins
• 11/16" socket required for the kin pin nuts (Pre 2022 model)
• 9/16" socket required for the kin pin nuts (2022 model and later)
• 11/16” flat wrench required for the king pin lock nuts
• 1/2" socket required for the wheel nuts
• 5mm Allen key required for the for the stopper screw

Stoppers:

• 5/8” stoppers and jam plugs
• Requires Pilot Falcon stopper screw

Bearing Size:

• 8mm bearings

Cushions:

• Compatible with Bionic cushions only

Pivot Cups:

• Pilot pivot cups

Tools Provided:

• 5mm Allen tool

Recommended Tools:

• Powerdyne Y4 skate tool
• Powerdyne 11/16" wrench
• Enuff skate tool (2022 model and later)
• Powerdyne T-handle 5mm Allen key

Specs:

• Reinforced Zytel Nylon base plates
• 16º standard king pins
• 9/16" socket required for the king pin nuts
• 9/16” flat wrench required for the king pin lock nuts
• 1/2" socket required for the wheel nuts
• 15/16" crescent wrench required for the stopper locking nut
• **Earlier generations of these plates (prior to 2023) are not compatible with wheels that are smaller than 62mm. A conversion kit is available to enable the plates to take smaller wheels.

Stoppers:

• 5/8” stoppers and jam plugs
• Requires 5/8” stopper hardware

Bearing Size:

• 8mm bearings

Cushions:

• Compatible with stock Viper cushions only

Pivot Cups:

• Pilot pivot cups

Tools Provided:

• No tools provided

Recommended Tools:

• Powerdyne Y3 skate tool
• Impala skate tool

Specs:

• Aluminum base plates
• 10º inverted king pins
• 9/16” socket required for the king pin nuts
• 1/2” socket required for the wheel nuts
• 15/16” crescent required for the stopper nuts

Stoppers:

• 5/8” stoppers and jam plugs
• Requires 5/8” stopper hardware

Bearing Size:

• 8mm bearings

Cushions:

• Comes standard with hard cushions
• Compatible with Reactor Magic cushions, with the 2mm nylon washer under the barrel cushions retainer

Pivot Cups:

• Marvel pivot cups

Tools Provided:

• Crab wrench (9/16", 1/2", 15/16")

Recommended Tools:

• Powerdyne Y3 skate tool
• Impala skate tool

Specs:

• Lightweight air craft aluminum base plates
• 10º standard king pins
• 11/16” socket required for the king pin nuts
• 1/2” socket required for the wheel nuts
• 5mm Allen key required for the stopper screws

Stoppers:

• 5/8” stoppers and jam plugs
• Requires Powerdyne stopper screw

Bearing Size:

• 8mm bearings

Cushions:

• Reactor Magic cushions, only

Pivot Cups:

• Reactor Pivot cups

Tools Provided:

• 5mm Allen key
• 11/16” crescent wrench

Recommended Tools:

• Powerdyne Y4 skate tool
• Powerdyne 11/16" wrench

Specs:

• Lightweight extruded air craft aluminum base plates
• 10º standard king pins
• Adjustable pivots
• Delrin pivot cups
• 11/16” socket required for the king pin nuts
• 3/8” flat wrench required for the adjustable pivot pins
• 1/2” flat wrench required for the pivot lock nuts
• 1/2” socket required for the wheel nuts
• 5mm Allen key required for the stopper screws

Stoppers:

• 5/8” stoppers and jam plugs
• Requires Powerdyne stopper screw

Bearing Size:

• 8mm bearings

Cushions:

• Reactor Magic cushions, only

Pivot Cups:

• Reactor Delrin pivot cups

Tools Provided:

• 5mm Allen key
• 11/16” crescent wrench
• Double sided wrench for pivot adjustments

Recommended Tools:

• Powerdyne Y4 skate tool
• Powerdyne 11/16" wrench

Specs:

• Nylon base plates
• 15º inverted king pins
• 9/16” socket required for the king pin nuts
• 1/2” socket required for the wheel nuts
• 15/16” crescent wrench required for the stopper nuts

Stoppers:

• 5/8” stoppers and jam plugs
• Requires 5/8” stopper hardware

Bearing Size:

• 8mm bearings

Cushions:

• Comes standard with Universal Magic Cushions
• Compatible with Sure-Grip Super Cushions

Pivot Cups:

• Riedell Thrust pivot cups

Tools Provided:

• Crab wrench (9/16", 1/2", 15/16")

Recommended Tools:

• Powerdyne Y3 skate tool
• Impala skate tool

Specs:

• Nylon base plates
• 10º inverted king pins
• 9/16" socket required for the king pin nuts
• 1/2" socket required for the wheel nuts
• 5mm Allen key required for the stopper screws

Stoppers:

• 5/16” bell type stoppers and jam plugs
• Requires Rio Roller stopper screw

Bearing Size:

• 8mm bearings

Cushions:

• Comes standard with Rio cushions
• Compatible with Sure-Grip Super Cushions

Pivot Cups:

• Stock Rio Roller pivot cups

Tools Provided:

• No tools provided

Recommended Tools:

• Enuff skate tool
• Powerdyne T-handle 5mm Allen key

Specs:

• CNC Machined aluminum alloy base plates
• 16º standard king pins
• Adjustable pivots
• 17mm socket required for the king pin nuts
• 4mm Allen key required for the king pin lock screws
• 6mm crescent wrench required for the adjustable pivot pins
• 13mm crescent wrench required for the pivot locking nuts
• 11mm socket required for the wheels nuts
• 5mm Allen key required for the stopper screws

Stoppers:

• Metric stoppers, and jam plugs
• Requires Roll-Line stopper screw

Bearing Size:

• 7mm bearings

Cushions:

• Roll Line Variant Cushions only

Pivot Cups:

• Roll Line nylon pivot cups

Tools Provided:

• 6mm, 13mm and 17mm crescent wrenches
• 4mm and 5mm Allen keys
• 11mm socket

Recommended Tools:

• Roll Line tool kit

Specs:

• DuPont Zytel nylon base plates
• 10º inverted king pins
• 9/16” socket required for the king pin nuts
• 1/2" socket required for the wheel nuts
• 15/16" crescent wrench required for the stopper locking nuts

Stoppers:

• 5/8” stoppers and jam plugs
• Requires 5/8” stopper hardware

Bearing Size:

• 8mm bearings

Cushions:

• Comes standard with hard double barrel cushions
• Compatible with Sure-Grip Super Cushions
• Compatible with Universal Magic Cushions

Pivot Cups:

• Sunlite pivot cups only (very tight fit, you will need to use the pivot of the truck to insert them)

Tools Provided:

• No tools provided

Recommended Tools:

• Powerdyne Y3 skate tool
• Impala skate tool

Specs:

• White powder coated magnesium base plates
• 10º Inverted king pins
• Adjustable pivots
• Delrin pivot cups
• 9/16” socket required for the king pin nuts
• 3/8” flat wrench required for the adjustable pivot pins
• 1/2” flat wrench required for the pivot lock nuts
• 1/2” socket required for the wheel nuts
• 3/16" Allen key required for the stopper screws

Stoppers:

• 5/8” stoppers and jam plugs
• Requires Sure-Grip stopper screw

Bearing Size:

• 8mm bearings

Cushions:

• Comes standard with Sure-Grip Super Cushions

Pivot Cups:

• Sure-Grip Delrin pivot cups

Tools Provided:

• 3/16" Allen key
• Double ended crescent wrench (3/8", 1/2")

Recommended Tools:

• Enuff skate tool
• Powerdyne Y4 skate tool
• Red handle Allen key - 3/16”

Specs:

• White powder coated magnesium base plates
• 45º Inverted king pins
• Adjustable pivots
• Delrin pivot cups
• 9/16” socket required for the king pin nuts
• 3/8” flat wrench required for the adjustable pivot pins
• 1/2” flat wrench required for the pivot lock nuts
• 1/2” socket required for the wheel nuts
• 3/16" Allen key required for the stopper screws

Stoppers:

• 5/8” stoppers and jam plugs
• Requires Sure-Grip stopper screw

Bearing Size:

• 8mm bearings

Cushions:

• Comes standard with Sure-Grip Super Cushions

Pivot Cups:

• Sure-Grip Delrin pivot cups

Tools Provided:

• 3/16" Allen key
• Double ended crescent wrench (3/8", 1/2")

Recommended Tools:

• Enuff skate tool
• Powerdyne Y4 skate tool
• Red handle Allen key - 3/16”

Specs:

• Cast aluminum base plates
• 10º inverted king pins (or standard king pins that requires an 11/16” wrench for the king pin lock nuts)
• 9/16” socket required for the king pin nuts
• 1/2” socket required for the wheel nuts
• 3/16” Allen key required for stopper screws

Stoppers:

• 5/8” stoppers and jam plugs
• Requires Sure-Grip stopper screw

Bearing Size:

• 8mm bearings

Cushions:

• Comes standard with Sure-Grip double barrel
• Compatible with Universal Magic Cushions
• Compatible with Sure-Grip Super Cushions

Pivot Cups:

• Sure-Grip pivot cups

Tools Provided:

• 3/16" Allen key

Recommended Tools:

• Powerdyne Y3 skate tool
• Impala skate tool
• Red handle Allen key - 3/16”

Specs:

• Nylon base plates
• 10º inverted king pins
• 9/16” socket required for the king pin nuts
• 1/2” socket required for the wheel nuts
• 15/16” crescent wrench required for the stopper nuts

Stoppers:

• 5/8” stoppers and jam plugs
• Requires 5/8” stopper hardware

Bearing Size:

• 8mm bearings

Cushions:

• Comes standard Sure-Grip double barrel
• Compatible with Universal Magic Cushions
• Compatible with Sure-Grip Super Cushions

Pivot Cups:

• Sure-Grip pivot cups

Tools Provided:

• No tools provided

Recommended Tools:

• Powerdyne Y3 skate tool
• Impala skate tool